Directions for use, Top pad removal, Emergency stop – Oakworks DTPM300 User Manual
Page 12
Advertising
Underside of Tabletop
Top pad flap
9
DIReCTIOnS fOR USe
TOP PAD ReMOvAl
Remove the Top Pad by pulling the flaps at the underside of the table on either end until the Velcro®
detaches. Replace the pad by first centering on the table and then pressing the flaps in place, anchor-
ing the flaps to the Fastener Velcro
®
as shown. (applies to both the 1” (2.5 cm.) & 2” (5 cm.) pads)
Fastener Velcro
®
All electric tables are equipped with an emergency stop switch.
eMeRGenCy STOP
To stop the
operation, push
the red button.
To reset, rotate
the red button
clockwise.
If necessary, you can also remove the plug from the outlet. Be sure access is not blocked for disconnecting
the table from power.
Advertising