OmniSistem PR XL 1200 Framing - Manual (Page 16)

16/26
224-231 Rotation speed 5
232-239 Rotation speed 6
240-247 Rotation speed 7
248-255 Rotation speed 8 (fastest)
24 25 40 Focus 000-255 Linearly focusing
41 Focus Fine 000-255 Focus in 16 precision
25 26 42 Zoom 000-255 From large to small
43 Zoom Fine 000-255 Zoom in 16 precision
26 27 44 Pan 000-255 Pan rotation 450°
28 45 Pan Fine 000-255 Pan rotation in 16 precision
27 29 46 Tilt 000-255 Tilt rotation 270°
30 47 Tilt Fine 000-255 Tilt rotation in 16 precision
31 48 Pan & Tilt
speed
000-255 Pan&Tilt speed from fast to slow
000-048 Reserved
049-080 Reset
081-112 Reserved
113-144
Lamp off ( stop in DMX value for 10 s)
145-168 Reserved
169-200
Lamp power reduced to 50%
201-223 Reserved
28 32 49 Control
224-255 Lamp on (See remark below)
Remark:
If you intend to turn on/off the lamp via the last channel of the controller, don’t attempt to push the channel to value
224-255 immediately after turning it off, or push the slide bar to value 224-255 to wait it cooling. Under these 2
circumstances, the lamp can not be turned on. The right operation is: turn it off---cool down---push the slide bar to turn it
on.