OmniSistem PR XS 250 - Manual (Page 13)

13/22
216-223 Gobo shake 6 (From slow to fast)
224-231 Gobo shake 7 (From slow to fast)
232-239 Gobo shake 8 (From slow to fast)
240-247 Gobo shake 9 (From slow to fast)
248-255 Gobo shake 10 (From slow to fast)
5 5 6
Rotating Gobo
Wheel
000-016 white
017-032 Gobo1
033-048 Gobo 2
049-064 Gobo 3
065-080 Gobo 4
081-096 Gobo 5
097-112 Gobo 6
113-127 Gobo7
128-150 Rotation speed from slow to fast
151-171
Reverse rotation speed from slow to
fast
172-183 Gobo shake 1 speed from slow to fast
184-195 Gobo shake 2 speed from slow to fast
196-207 Gobo shake 3 speed from slow to fast
208-219 Gobo shake 4 speed from slow to fast
220-231 Gobo shake 5 speed from slow to fast
232-243 Gobo shake 6 speed from slow to fast
244-255 Gobo shake 7 speed from slow to fast
6 6 7 Gobo rotation
000-127 0~540°index
128-188 Rotation speed from slow to fast
189-194 Stop rotating
195-255
Reverse rotation speed from slow to
fast
7 8
Gobo rotation
Fine
000-255 Gobo rotation in 16 Bit precision
7 8 9 Prism / Frost
000-020 Clear
021-255 Prism
8 9 10 Prism rotation
000-009 Stop in current position
010-127 Rotation speed from slow to fast
128-136 Stop in current position
137-255
Reverse rotation speed from slow to
fast
9 10 11 Focus 000-255 Linearly focusing
12 Focus Fine 000-255 Focus in 16 precision
10 11 13 Pan 000-255 Pan rotation 540°
12 14 Pan Fine 000-255 Pan rotation in 16 precision
11 13 15 Tilt 000-255 Tilt rotation 270°
14 16 Tilt Fine 000-255 Tilt rotation in 16 precision
15 17 Pan & Tilt
speed
000-255 Pan&Tilt speed from fast to slow
12 16 18 Control
000-048 Reserved
049-080 Reset
081-112 Reserved
113-144 Lamp off ( stop in DMX value for 10 s)
145-168 Reserved
169-200 Lamp power reduced to 50%
201-223 Reserved
224-255 Lamp on (See remark below)
Remark:
If you intend to turn on/off the lamp via the last channel of the controller, don’t attempt to push the channel to value
224-255 immediately after turning it off, or push the slide bar to value 224-255 to wait it cooling. Under these 2
circumstances, the lamp can not be turned on. The right operation is: turn it off---cool down---push the slide bar to turn it
on.