Back panel – On Networks N300RM User Manual User Manual
Page 10
Hardware Setup
10
N300 WiFi ADSL2+ Modem Router (N300RM)
Back Panel
The back panel has the connections shown in the following figure.
RJ-45 Ethernet
RJ-11 ADSL
Power On/Off
LAN ports (4)
Power connector
Internet port
Figure 3. Router, back panel
See
103 for information about restoring factory settings.
ADSL
•
Solid green
. You have a DSL connection. In technical terms, the DSL port is synchronized
with an ISP’s network-access device.
•
Blinking green
. The modem router is negotiating the best possible speed on the DSL line.
•
Off
. The unit is off or there is no DSL link established.
Ethernet
(1-4)
•
Solid green
. The LAN port has detected an Ethernet link with a device such as a computer.
•
Blinking green
. Data is being transmitted or received.
•
Off
. No link is detected on this port.
Power/
Check
•
Solid green
. Power is supplied to the modem router.
•
Blinking green
. The router is starting up.
•
Solid red
. Power-on self-test (POST) failed or a device malfunction has occurred.
•
Off
. Power is not supplied to the modem router.
Table 1. Button and LED descriptions (continued)
Icon
Description