JVC KS-F500 - Manual (Page 12)

12
ENGLISH
1
Select the item you want to adjust.
Indication To do: Range
BAS Adjust the bass –06 (min.) — +06 (max.)
(Bass)
TRE Adjust the treble –06 (min.) — +06 (max.)
(Treble)
FAD Adjust the front and rear speaker R06 (rear only) — F06 (front only)
(Fader)* balance
BAL Adjust the left and right speaker L06 (left only) — R06 (right only)
(Balance) balance
VOL Adjust the volume 00 (min.) — 50 (max.)
(Volume)
Adjusting the sound
You can adjust the sound characteristics to your preference.
Note:
*
If you are using a two-speaker system, set the fader level to “00”.
2
Adjust the level.
Note:
Normally the control dial works as the volume control. So you do not
have to select “VOL” to adjust the volume level.
SOUND ADJUSTMENTS
LOUD
2
1
To turn on/off the loudness function
The human ear is less sensitive to low and high frequencies at low volumes.
The loudness function can boost these frequencies to produce well-balanced sound at low
volume level. Each time you press LOUD, the loudness function turns on and off alternately.
EN.11-15KS-F500[EE] 00.3.28, 3:27 PM 12