JVC KS-F500 - Manual (Page 19)

19
ENGLISH
Selecting the level display
You can select the level display according to your preference.
When shipped from the factory, “AUDIO 2” is selected.
• AUDIO 1: Shows the audio level indicator and the equalization pattern indicator.
• AUDIO 2: Alternates “AUDIO 1” setting and illumination display.
• OFF:
Erases the audio level indicator and the equalization pattern indicator.
1. Press and hold SEL (Select) for more than 2 seconds to call up the general settings mode.
2. Select “LEVEL” with
¢
or
4
.
3. Select the desired mode with the control dial.
The level display setting changes as follows:
AUDIO 1 AUDIO 2 OFF
Selecting the telephone muting
This mode is used when a cellular phone system is connected. Depending on the phone
system used, select either “MUTING 1” or “MUTING 2”, whichever mutes the sounds from this
unit.
When shipped from the factory, this mode is deactivated.
• MUTING 1: Select this if this setting can mute the sounds.
• MUTING 2: Select this if this setting can mute the sounds.
• OFF: Cancels the telephone muting.
1. Press and hold SEL (Select) for more than 2 seconds to call up the general settings mode.
2. Select “TEL” with
¢ or 4 .
3. Select “MUTING 1”, “MUTING 2” or “OFF” with the control dial.
The telephone muting mode changes as follows:
MUTING 1 MUTING 2 OFF
EN.16-20KS-F500[EE] 00.3.28, 3:28 PM 19