Compact Power Boxer 427W - Manual (Page 25)

6-7-06 - Fifth Proof
2-7
Operating Controls
Operating Controls Description
1. Creep – When a hydraulically powered auxiliary attachment is in use, this control allows the
operator to adjust the machine travel speed.
2. Boom Raise and Lower – This lever controls the raising and lowering of the boom
assembly.
3. Left Travel Motor Control – Pushing the lever forward rotates the left side wheels for
forward travel. Pulling the lever backwards rotates the left side wheels for reverse travel.
4. Right Travel Motor Control – Pushing the lever forward rotates the right side wheels for
forward travel. Pulling the lever backwards rotates the right side wheels for reverse travel.
5. Attachment Tilt – Pushing the lever forwards tilts the attachment plate forwards, lowering
the attachment. Pulling the lever backwards tilts the attachment plate backwards, raising the
attachment.
6. Attachment Activation Lever – With your right hand, squeeze the AUXILIARY
attachment control lever towards the hand hold to activate the attachment in the FORWARD
motion.
NOTE: The lever is spring loaded and when released, will automatically move from the
FORWARD motion position to NEUTRAL stopping attachment motion.
If you want to reverse the operation of the attachment, move the auxiliary control lever to the
REVERSE position. The control lever will remain in the REVERSE position detent until it
is moved to the NEUTRAL position.
NOTE: If using the auger, FORWARD activates clockwise rotation, BACKWARD activates
counter-clockwise rotation.
2129