Crimestopper Security Products CS-2205 - Manual (Page 29)

29
Program Mode For LED REMOTE TRANSCEIVER
Transceiver Button System Function Remark
Program Mode - ( ) Button Lock Press within 5 seconds
Program Mode - ( ) Power Save Mode Press within 5 seconds
Program Mode - Switching code for 2nd / 1st Car Operation Press within 5 seconds
Program Mode - + Demo Mode Press within 5 seconds
- + System’s Status Check Press within 3 seconds
- ( ) Optional Driving Pager Press within 3 seconds
- (M) Last Trigger Memory Retrieval Press within 3 seconds
Button Lock On / off: It is useful if you want to disable the transmission function of the remote control temporarily to prevent
from any inadvertent pressing of buttons by others. The “beep” sound always muted while press button and / / Z /
LED will flash at the same time for 3 seconds to show the remote control transceiver is on “Button Lock” mode.
1. Press and hold all four remote control buttons simultaneously unit one long beep is heard. Programming has now been
entered.
2. Within 5 seconds press ( ) button. The remote will beep once for “On”, twice for “Off”.
3. To exit programming mode, take no action for five seconds. The remote control will generate two long beeps to indicate
programming mode has been exited.
THE ACTION OF THE 2-WAY LED REMOTE CONTROL TRANSCEIVER
LED MELODY SOUND
Button Lock Mode / / Z / LED will pause
flashing at the same time for 3
seconds
No “bi” sound while pressing the button of the remote control
transceiver
Power Save Mode: While the power save mode, the LCD remote transceiver “sleep” until a button is pushed, extending the
life of battery. When power save mode is “Off”, the remote control will wake up periodically to check for messages from the
security module. When power save mode is “On”, the
icon on the LCD screens to indicate entry the “power save
mode”.
1. Press and hold all four remote control buttons simultaneously unit one long beep is heard. Programming has now been
entered.
2. Within 5 seconds, press the button to toggle “On” or “Off”. The remote will beep once for “On”, twice for “Off”.