Canon LV 7490 - Manual (Page 39)


ENGLISH
Setting up the projector
Click Setting on the main menu. This function is to set up the projector.
Select the sub menu [Aspect setting] or [Setting] and then set up each set-
ting.
Setting up the projector
Item Description
Aspect ..................... Switches the aspect mode. (Normal, Full, 16:9, Zoom, True, Custom) There may not be
available mode depending on the input mode as shown in the table below.
Ceiling ..................... Sets the image top/bottom and left/right reversed. (ON, OFF)
Rear ........................... Sets the image left/right reversed. (ON, OFF)
Reset......................... Resets the Screen settings.
Input source
Aspect mode VIDEO PC
Normal 4 4
Full 4 4
16:9 4 4
Zoom 4 4
True * 4
Custom 4 4
✐ The mark "
4
" means that the available aspect mode in
the selected input source system. The error message
appears when selecting the disabled aspect mode indi-
cated with "*".
Aspect setting
This function is to adjust the aspect mode of the projector. The values in the text box rep-
resent the current aspect status.