Canon LV 7490 - Manual (Page 40)

0
Chapter 4 Controlling the Projector
Setting 1
Item Description
Language .............. Sets the language display of projector's
on-screen display menu.
Auto setup ........... Executes the Auto PC, Auto input, and
Auto keystone functions below accord-
ing to the each setting after clicking
Start button.
Auto input ......... Sets the auto-input signal detection
mode. (ON1, ON2, OFF)
Auto PC ............... Sets the auto PC adjustment mode. (ON,
OFF)
Auto keystone .... Sets Auto Keystone mode. (Auto, Manual, OFF)
Background ......... Sets the screen background when no signal input. (Blue, User, Black)
Display .................... Switches on or off the on-screen menu display on the screen. (OFF, Countdown off,
ON)
Countdown off .......Displays image during the starting up.
Logo ......................... Sets on or off the logo display on the screen during the startup. (OFF, Default, User)
Item Description
Terminal ................. Sets the COMPUTER IN 2/MONITOR
OUT terminal. (COMPUTER2, Monitor
out)
Power management mode
...................................... Sets into the selected power manage-
ment mode (Standby, Exit, OFF) if the
input signal is interrupted and no
control key is pressed for the specified
period of time.
* The specified time can be set 1 to 30
min.
Direct power on
......................................Sets the power-on mode when the AC cord is connected to the outlet. (ON, OFF)
Lamp mode ......... Selects lamp control mode. (Auto, Normal, Eco1, Eco2)
Lamp life control ... Selects lamp life control mode (Mode1, Mode2) when the total use time exceeds
the recommended total hours of use.
Key lock .................. Sets the prohibition of controls either Projector or Remote control. (OFF, Projector,
Remote control)
Fan control
............. Sets the fan control speed.
OFF Normal mode
ON1 Highland mode 1
ON2 Highland mode 2
Setting 2