ClearOne comm CHATTM 150 - Manual (Page 20)

CHAT 150 PHONE BREAKOUT BOX
Press the Headset button on the phone breakout box to send audio from
the phone to the headset connected to the Chat 150 Breakout Box. This
will also disable audio going from the breakout Box to the Chat 150—it is
only routed to the headset. The phone Breakout Box LED indicator illumi-
nates, indicating that headset audio is activated. The Chat 150 LED indi-
cators remain lit, although audio is not routed to the Chat 150 from the
Breakout Box (USB audio is still active). Press the Headset button again
to disable headset audio and reactivate audio from the Breakout Box to
the Chat 150.
CHAT 150 VC BREAKOUT BOX
Once you have properly connected the Chat 150 VC Breakout Box to your
video conferencing device and TV using the included RCA Connection
Cable, all settings changes such as mute, microphone and speaker level
adjustments, etc., are controlled through the Chat 150 software.
The Breakout Box itself has no buttons and no functionality for making
settings changes. It does have an LED light that indicates power to the
device.
18
CHAT TM 150 Group Speaker Phone