ClearOne comm CHATTM 150 - Manual (Page 8)

CHAT TM 150 Group Speaker Phone
6
9. Connect your Chat 150 to the device you just configured for (see the
specific connection instructions in the following paragraphs).
> NOTE: When connecting to an analog device, you can leave the
Chat 150 connected to your PC if you wish. (If you do, then you
do not need to connect the power supply because the Chat 150
is being powered through the USB 2.0 cable.)
10. To ensure optimal sound quality, you need to customize the Chat
150’s audio settings for every application and device you will use.
Refer to the tuning procedures in the Optimizing Sound Quality
section in the user manual.
11. If you wish to further adjust the Chat 150 audio settings for this
device, refer to the Chat 150 User’s Manual for more information.