Installation instructions – Creda W810 User Manual
Page 14
INSTALLATION INSTRUCTIONS
14
Read the Gas Hob instructions before conversion, installation and using the Gas
Hob.
1
Rapid burner injector marked 92 - 1 off
2
Semi-rapid burner injector marked 72 - 2 off
3
Auxillary burner injector marked 55 - 1 off
Ensure that the Gas Hob is disconnected from the gas and electricity supply (Fig.1)
1.
Remove pan supports, burner caps,burner bodies and control knobs (Fig.2)
2.
Remove each injector and replace with LPG injector using 7mm A/F hexagonal
socket (Fig.3).
3.
Turn each gas tap bypass screw fully clockwise using a small flat bladed
screwdriver through the holes in the control panel.
The bypass screw is located to the side of the tap spindle (Fig.4).
LPG Conversion Instructions for Model W810, BG05
Hotplate Burner Injector Change and Bypass Screw Adjustment
Contents of kit:
FP089-01 Creda Gas Hob (W810) 12/09/2001 5:02 pm Page 14