Creda W810 - Manual (Page 6)

USING THE GAS HOB - FEATURES
6
DO NOT allow young children near to the appliance when the hob is in
use as the surfaces get extremely hot.
In order to obtain maximum performance from the burners, use pans with the
following diameters:
Rapid burner 22 - 28 cm
Standard burner 14 - 22 cm
Auxillary burner
10 - 14 cm
All pans should be positioned centrally over the burners.
OPERATION WHEN USING THE GAS HOB
Step 1 Check that the electricity is switched ON.
Step 2 Press the ignition button and then push and turn the control knob of the
chosen burner anticlockwise to the large flame symbol. The gas should
then ignite.
Step 3 Turn the control knob anticlockwise to the desired setting. Only turn the
control knob between the large flame symbol and the small flame
symbol when adjusting the setting.
Step 4 Place the pan centrally on the required burner.
Step 5 To switch off, turn the control knob fully clockwise.
FP089-01 Creda Gas Hob (W810) 12/09/2001 5:02 pm Page 6