Sony CDX-M700R - Manual (Page 21)

21
Presetting the RDS
stations with the AF and
TA data
When you preset RDS stations, the unit stores
each station’s data as well as its frequency, so
you don’t have to turn on the AF or TA
function every time you tune in the preset
station. You can select a different setting (AF,
TA, or both) for individual preset stations, or
the same setting for all preset stations.
Presetting the same setting for all
preset stations
1
Select an FM band (page 16).
2
Press (AF/TA) repeatedly to select either
“AF on,” “TA on” or “AF TA on” (for both
AF and TA functions).
Note that selecting “AF TA off” stores not
only RDS stations, but also non-RDS
stations.
Tip
If you select the mode using the buttons on the
unit, press (AF) and/or (TA) to select “AF on” and/
or “TA on.” Note that selecting “AF off” or “TA
off” stores not only RDS stations, but also
non-RDS stations.
3
Press (MENU), then press M or m
repeatedly until “BTM” appears.
4
Press , until “BTM” flashes.
5
Press (ENTER).
Presetting different settings for
each preset station
1
Select an FM band, and tune in the
desired station (page 16).
2
Press (AF/TA) repeatedly to select either
“AF on,” “TA on” or “AF TA on” (for both
AF and TA functions).
Tip
If you select the mode using the buttons on the
unit, press (AF) and/or (TA) to select “AF on” and/
or “TA on.”
3
Press the desired number button of the
unit until “MEM” appears.
Repeat from step 1 to preset other stations.
Tip
If you want to change the preset AF and/or TA
setting after you tune in the preset station, you
can do so by turning the AF or TA function on or
off.