Compaq Wireless Multi-band Signal Meter System Wolf - Manual (Page 13)

BVS Channel Table Editor
The BVS Channel Table Editor is a utility program that runs on your PC. It is used to create channel tables
that can then be used for Wolfpack scanning or as a channel table on the base Wolf software.
You can enter up to 30 different channels or frequencies. You can modify an existing table or create a new
table by pressing the associated buttons.
When entering data into the table, you must:
1. Select the band (0 is the Cellular Band, 1 is the PCS band).
2. Choose either a channel number or a frequency.
If you choose a channel number, the associated frequency will adjust when leaving the edit field. If you
choose a frequency, the associated channel number will change when you leave the edit field.
When you are done, save the file (will be a .BCT file). Then you move the table over to the iPAQ through
ActiveSync. Place the file into the “My Documents” folder on the iPAQ. Then you can import the table into
the appropriate software (Wolf or Wolfpack).
Page 12