Compaq Wireless Multi-band Signal Meter System Wolf - Manual (Page 6)

Page 5
The toolbar (shown below) gives the user more options on
every screen. The first icon has five interconnected colored
circles. Using this option will always return the user to the
main menu.
The second and third icons are arrows pointing upward and
downward. These options have different uses depending on
the currently active screen. For instance, on the access point
screen, the arrows are used to flip the current page of access
points.
The fourth icon represents a camera. This option takes snap-
shots of the current screen for later viewing. The pictures are
stored in JPEG format.
The “record” button is for logging a data file. The “stop” but-
ton is for terminating the logging of data. The “play” button
will be implemented in a later version of the software.
The icon with the letters “ABCD” enters the system options
screen.
The question mark icon reveals the application about box.
Single Channel Analysis
The “Single Channel” option allows users to choose a single
channel from either/both bands to view over a period of time.
When pressing the “Single Channel” button, an option screen
will appear. Place a checkmark by each band you wish to
examine. Then choose the frequency or channel in each band
selected .
After then pressing OK, a bar graph and an “over time” graph
will appear for each of the channels selected.