V ~ a – Chicago Electric POWER TOOL 94362 User Manual
Page 8
Page 8
SKU 94362
For technical questions, please call 1-800-444-3353.
SYMBOLOGY
V ~
A
xxxx/min.
Double Insulated
Canadian Standards
Association
Underwriters
Laboratories, Inc.
Volts Alternating Current
Amperes
No Load Revolutions
per Minute (RPM)
no
SPECIFIC SAFETY RULES
1.
Maintain a safe working environment. Keep the work area well lit. Make sure
there is adequate surrounding workspace. Always keep the work area free of
obstructions, grease, oil, trash, and other debris. Do not use this product in
areas near flammable chemicals, dusts, and vapors.
2.
Maintain labels and nameplates on the Saw. These carry important
information. If unreadable or missing, contact Harbor Freight Tools for a
replacement.
3.
Use eye and hearing protection. Always wear ANSI-approved safety impact
eye goggles and hearing protectors when using this product.
4.
Make sure to read and understand all instructions and safety precautions
as outlined in the manufacturer’s manual.
5.
When using a handheld power tool, always maintain a firm grip on the tool
with both hands (at all times) to resist starting torque.
6.
Always keep the Power Cord (71) away from moving parts of the Saw. Keep
the Power Cord away from the direction of the cut.
7.
Avoid unintentional starting. Make sure you are prepared to begin work before
turning on the Saw.
8.
Keep hands and fingers away from the Saw Blade (10) at all times. If both
hands are holding the Saw by its Handles (64, 65, 72), they cannot be cut by the
Saw Blade.