Chicago Electric 45 Watt Solar Kit 90599 - Manual (Page 2)

Page 2 For technical questions, please call 1-800-444-3353. SKU 90599
SAve ThIS MAnuAL
Keep this manual for the safety
warnings and precautions, installation,
operating, inspection, maintenance and
cleaning procedures. Write the product’s
serial number in the back of the manual
near the assembly diagram (or month
and year of purchase if product has no
number). Keep this manual and the
receipt in a safe and dry place for future
reference.
IMpORTAnT SAFeTY
InFORMATIOn
In this manual, on the labeling,
and all other information
provided with this product:
This is the safety alert
symbol. It is used to alert
you to potential personal
injury hazards. Obey all
safety messages that
follow this symbol to avoid
possible injury or death.
dAnGeR indicates
a hazardous
situation which, if not
avoided, will result in death or
serious injury.
WARnInG
indicates a
hazardous situation which, if
not avoided, could result in
death or serious injury.
cAuTIOn, used
with the safety
alert symbol, indicates a
hazardous situation which, if
not avoided, could result in
minor or moderate injury.
nOTIce is used to
address practices
not related to personal injury.
cAuTIOn, without
the safety alert
symbol, is used to address
practices not related to
personal injury.
WARnInG Read all safety
warnings and instructions.
Failure to follow the warnings and
instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and
instructions for future reference.
The warnings, precautions,
and instructions discussed in
this instruction manual cannot
cover all possible conditions and
situations that may occur. It must
be understood by the operator that
common sense and caution are
factors which cannot be built into
this product, but must be supplied
by the operator.
Installation precautions
1. exercise special caution if working
on roof or another high location.
Keep proper footing and balance at
all times. Follow ladder supplier’s
precautions whenever working near
or on a ladder.
2. Install all sensitive electrical
components (including wiring
connections, regulator, and
battery) inside a weatherproof
enclosure to prevent electric
shock.