COBY electronic DVD-958 - Manual (Page 7)

1 VIDEO SYSTEM CONNECTION
Connections
The following video outputs are available for this unit .
1.1 Composite Video
Use the cable with yellow plug of an AV cable to connect the composite video
output of this unit to the video input of a TV/monitor.
1.2 S-Video
Use a S-Video cable to connect the S-Video output of this unit to the S-Video
input of a TV/monitor.
1. 3 Component Video
Use a 3-core AV cable to connect the component outputs of this unit to the
corresponding inputs of a TV/monitor.
1. 4 HDMI
HDMI output presents the highest possible resolutions and video quality. If an
HDMI socket is present on your television, use it. Use an HDMI cable to
connect the HDMI output of this unit to the HDMI input of a TV/monitor.
-6-
Notes:
Of the above video outputs, the HDMI is the best, Component Video is the second best,
S-VIDEO is good and the composite video is standard. Use the best available video
connection.
Don’t make all the connections above at one time, otherwise the produced pictures
will be affected.
Only when the video settings conform to the actual video system connections does the
player produce the corresponding video output. (Please refer to the Video Setup in
System Setup).
DVD Player Video Output
TV/Monitor Video Input
Component Video Input
1 VIDEO SYSTEM CONNECTION
Connections
The following video outputs are available for this unit .
1.1 Composite Video
Use the cable with yellow plug of an AV cable to connect the composite video
output of this unit to the video input of a TV/monitor.
1.2 S-Video
Use a S-Video cable to connect the S-Video output of this unit to the S-Video
input of a TV/monitor.
1. 3 Component Video
Use a 3-core AV cable to connect the component outputs of this unit to the
corresponding inputs of a TV/monitor.
1. 4 HDMI
HDMI output presents the highest possible resolutions and video quality. If an
HDMI socket is present on your television, use it. Use an HDMI cable to
connect the HDMI output of this unit to the HDMI input of a TV/monitor.
-6-
Notes:
Of the above video outputs, the HDMI is the best, Component Video is the second best,
S-VIDEO is good and the composite video is standard. Use the best available video
connection.
Don’t make all the connections above at one time, otherwise the produced pictures
will be affected.
Only when the video settings conform to the actual video system connections does the
player produce the corresponding video output. (Please refer to the Video Setup in
System Setup).
DVD Player Video Output
TV/Monitor Video Input
Component Video Input
1 VIDEO SYSTEM CONNECTION
Connections
The following video outputs are available for this unit .
1.1 Composite Video
Use the cable with yellow plug of an AV cable to connect the composite video
output of this unit to the video input of a TV/monitor.
1.2 S-Video
Use a S-Video cable to connect the S-Video output of this unit to the S-Video
input of a TV/monitor.
1. 3 Component Video
Use a 3-core AV cable to connect the component outputs of this unit to the
corresponding inputs of a TV/monitor.
1. 4 HDMI
HDMI output presents the highest possible resolutions and video quality. If an
HDMI socket is present on your television, use it. Use an HDMI cable to
connect the HDMI output of this unit to the HDMI input of a TV/monitor.
-6-
Notes:
Of the above video outputs, the HDMI is the best, Component Video is the second best,
S-VIDEO is good and the composite video is standard. Use the best available video
connection.
Don’t make all the connections above at one time, otherwise the produced pictures
will be affected.
Only when the video settings conform to the actual video system connections does the
player produce the corresponding video output. (Please refer to the Video Setup in
System Setup).
DVD Player Video Output
TV/Monitor Video Input
Component Video Input
Y
1 VIDEO SYSTEM CONNECTION
Connections
The following video outputs are available for this unit .
1.1 Composite Video
Use the cable with yellow plug of an AV cable to connect the composite video
output of this unit to the video input of a TV/monitor.
1.2 S-Video
Use a S-Video cable to connect the S-Video output of this unit to the S-Video
input of a TV/monitor.
1. 3 Component Video
Use a 3-core AV cable to connect the component outputs of this unit to the
corresponding inputs of a TV/monitor.
1. 4 HDMI
HDMI output presents the highest possible resolutions and video quality. If an
HDMI socket is present on your television, use it. Use an HDMI cable to
connect the HDMI output of this unit to the HDMI input of a TV/monitor.
-6-
Notes:
Of the above video outputs, the HDMI is the best, Component Video is the second best,
S-VIDEO is good and the composite video is standard. Use the best available video
connection.
Don’t make all the connections above at one time, otherwise the produced pictures
will be affected.
Only when the video settings conform to the actual video system connections does the
player produce the corresponding video output. (Please refer to the Video Setup in
System Setup).
DVD Player Video Output
TV/Monitor Video Input
Component Video Input
Y
Cr/Pb
Cr/Pr
1 VIDEO SYSTEM CONNECTION
Connections
The following video outputs are available for this unit .
1.1 Composite Video
Use the cable with yellow plug of an AV cable to connect the composite video
output of this unit to the video input of a TV/monitor.
1.2 S-Video
Use a S-Video cable to connect the S-Video output of this unit to the S-Video
input of a TV/monitor.
1. 3 Component Video
Use a 3-core AV cable to connect the component outputs of this unit to the
corresponding inputs of a TV/monitor.
1. 4 HDMI
HDMI output presents the highest possible resolutions and video quality. If an
HDMI socket is present on your television, use it. Use an HDMI cable to
connect the HDMI output of this unit to the HDMI input of a TV/monitor.
-6-
Notes:
Of the above video outputs, the HDMI is the best, Component Video is the second best,
S-VIDEO is good and the composite video is standard. Use the best available video
connection.
Don’t make all the connections above at one time, otherwise the produced pictures
will be affected.
Only when the video settings conform to the actual video system connections does the
player produce the corresponding video output. (Please refer to the Video Setup in
System Setup).
DVD Player Video Output
TV/Monitor Video Input
Component Video Input
Y
Cr/Pb
Cr/Pr
1 VIDEO SYSTEM CONNECTION
Connections
The following video outputs are available for this unit .
1.1 Composite Video
Use the cable with yellow plug of an AV cable to connect the composite video
output of this unit to the video input of a TV/monitor.
1.2 S-Video
Use a S-Video cable to connect the S-Video output of this unit to the S-Video
input of a TV/monitor.
1. 3 Component Video
Use a 3-core AV cable to connect the component outputs of this unit to the
corresponding inputs of a TV/monitor.
1. 4 HDMI
HDMI output presents the highest possible resolutions and video quality. If an
HDMI socket is present on your television, use it. Use an HDMI cable to
connect the HDMI output of this unit to the HDMI input of a TV/monitor.
-6-
Notes:
Of the above video outputs, the HDMI is the best, Component Video is the second best,
S-VIDEO is good and the composite video is standard. Use the best available video
connection.
Don’t make all the connections above at one time, otherwise the produced pictures
will be affected.
Only when the video settings conform to the actual video system connections does the
player produce the corresponding video output. (Please refer to the Video Setup in
System Setup).
DVD Player Video Output
TV/Monitor Video Input
Component Video Input
Y
Cr/Pb
Cr/Pr
1 VIDEO SYSTEM CONNECTION
Connections
The following video outputs are available for this unit .
1.1 Composite Video
Use the cable with yellow plug of an AV cable to connect the composite video
output of this unit to the video input of a TV/monitor.
1.2 S-Video
Use a S-Video cable to connect the S-Video output of this unit to the S-Video
input of a TV/monitor.
1. 3 Component Video
Use a 3-core AV cable to connect the component outputs of this unit to the
corresponding inputs of a TV/monitor.
1. 4 HDMI
HDMI output presents the highest possible resolutions and video quality. If an
HDMI socket is present on your television, use it. Use an HDMI cable to
connect the HDMI output of this unit to the HDMI input of a TV/monitor.
-6-
Notes:
Of the above video outputs, the HDMI is the best, Component Video is the second best,
S-VIDEO is good and the composite video is standard. Use the best available video
connection.
Don’t make all the connections above at one time, otherwise the produced pictures
will be affected.
Only when the video settings conform to the actual video system connections does the
player produce the corresponding video output. (Please refer to the Video Setup in
System Setup).
DVD Player Video Output
TV/Monitor Video Input
Component Video Input
Y
Cr/Pb
Cr/Pr
Y U/Pb V/Pr
Component Video Output
1 VIDEO SYSTEM CONNECTION
Connections
The following video outputs are available for this unit .
1.1 Composite Video
Use the cable with yellow plug of an AV cable to connect the composite video
output of this unit to the video input of a TV/monitor.
1.2 S-Video
Use a S-Video cable to connect the S-Video output of this unit to the S-Video
input of a TV/monitor.
1. 3 Component Video
Use a 3-core AV cable to connect the component outputs of this unit to the
corresponding inputs of a TV/monitor.
1. 4 HDMI
HDMI output presents the highest possible resolutions and video quality. If an
HDMI socket is present on your television, use it. Use an HDMI cable to
connect the HDMI output of this unit to the HDMI input of a TV/monitor.
-6-
Notes:
Of the above video outputs, the HDMI is the best, Component Video is the second best,
S-VIDEO is good and the composite video is standard. Use the best available video
connection.
Don’t make all the connections above at one time, otherwise the produced pictures
will be affected.
Only when the video settings conform to the actual video system connections does the
player produce the corresponding video output. (Please refer to the Video Setup in
System Setup).
DVD Player Video Output
TV/Monitor Video Input
Component Video Input
Y
Cr/Pb
Cr/Pr
Y U/Pb V/Pr
Component Video Output
VIDEO S-VIDEO
1 VIDEO SYSTEM CONNECTION
Connections
The following video outputs are available for this unit .
1.1 Composite Video
Use the cable with yellow plug of an AV cable to connect the composite video
output of this unit to the video input of a TV/monitor.
1.2 S-Video
Use a S-Video cable to connect the S-Video output of this unit to the S-Video
input of a TV/monitor.
1. 3 Component Video
Use a 3-core AV cable to connect the component outputs of this unit to the
corresponding inputs of a TV/monitor.
1. 4 HDMI
HDMI output presents the highest possible resolutions and video quality. If an
HDMI socket is present on your television, use it. Use an HDMI cable to
connect the HDMI output of this unit to the HDMI input of a TV/monitor.
-6-
Notes:
Of the above video outputs, the HDMI is the best, Component Video is the second best,
S-VIDEO is good and the composite video is standard. Use the best available video
connection.
Don’t make all the connections above at one time, otherwise the produced pictures
will be affected.
Only when the video settings conform to the actual video system connections does the
player produce the corresponding video output. (Please refer to the Video Setup in
System Setup).
DVD Player Video Output
TV/Monitor Video Input
Component Video Input
Y
Cr/Pb
Cr/Pr
Y U/Pb V/Pr
Component Video Output
VIDEO S-VIDEO
1 VIDEO SYSTEM CONNECTION
Connections
The following video outputs are available for this unit .
1.1 Composite Video
Use the cable with yellow plug of an AV cable to connect the composite video
output of this unit to the video input of a TV/monitor.
1.2 S-Video
Use a S-Video cable to connect the S-Video output of this unit to the S-Video
input of a TV/monitor.
1. 3 Component Video
Use a 3-core AV cable to connect the component outputs of this unit to the
corresponding inputs of a TV/monitor.
1. 4 HDMI
HDMI output presents the highest possible resolutions and video quality. If an
HDMI socket is present on your television, use it. Use an HDMI cable to
connect the HDMI output of this unit to the HDMI input of a TV/monitor.
-6-
Notes:
Of the above video outputs, the HDMI is the best, Component Video is the second best,
S-VIDEO is good and the composite video is standard. Use the best available video
connection.
Don’t make all the connections above at one time, otherwise the produced pictures
will be affected.
Only when the video settings conform to the actual video system connections does the
player produce the corresponding video output. (Please refer to the Video Setup in
System Setup).
DVD Player Video Output
TV/Monitor Video Input
Component Video Input
Y
Cr/Pb
Cr/Pr
Y U/Pb V/Pr
Component Video Output
VIDEO S-VIDEO
VIDEO
S-VIDEO
Composite Video and S-Video Input
Composite Video and S-Video Output
HDMI Input
HDMI Output