phil&teds e3 twin buggy - Manual (Page 13)

tricks ` treats
11 10
buggy storage
bacpac X
Put it on your back or attach it to your buggy.
1.
Remove 2 straps looped through D rings,
‘a’ and ‘b’ , at top of bacpac.
2.
Attach clips on straps to bacpac D rings,
‘a’ and ‘b’ , and attach straps around
buggy handle using snaps.
3.
Use hook/loop tape on bottom of 2
shoulder straps to attach bacpac to either
side of buggy frame.
4.
Bottle/snack holder clips into holder
on buggy side (right hand side when
standing at back of buggy).
buggy liners
buggy bunny
1. Place in buggy and
feed harness straps
through gaps.
woolly & warm
1.
Feed harness straps
through slots on rear
of liner (cut new slots
as required).
snuggle & snooze
1.
Feed harness straps
through slots on rear
of sleeping bag.
a
b