phil&teds e3 twin buggy - Manual (Page 5)

1.
Take main buggy and lay flat
(sunhoods up) as shown.
one: wheeling ` dealing
2.
Lift handle so rear axle is clear to
attach rear wheels.
3.
Remove rear wheels from plastic bag
and use scissors to unwrap packaging
(discard bag immediately – it is a
suffocation hazard for children).
4.
Take one rear wheel and push in silver
button on silver wheel axle.
5. Hold silver button in while inserting
wheel axle into buggy frame. Line up
silver button so it pops out of hole
on frame.
3 2
6. Repeat for second rear wheel on
opposite side (wheels work on
either side).
`