PRG V276 Installation & Operation Manual - Manual (Page 21)

V276 ON MAC INSTALLATION & OPERATION MANUAL 11
BASIC OPERATION
The following sections provide basic procedures for powering up the hardware and starting the software application.
For complete instructions on controlling a lighting system, refer to the Vx76 Software User Manual.
Power Up Console and Launch Vx76 Application
Use the following procedure to power up the console and to launch the software application.
To power up and launch:
Step 1. At rear of console, set power switch to ON position (Figure
10).
Step 2. At Mac desktop, double-click Vx76 icon to launch
application. A new show file (or last open show file) will
automatically load and Task Progress window will show
progress of data downloads.
Quit/Restart Vx76 Application
The Vx76 software application can be independently closed and restarted.
This is useful for upgrading the software or for restarting the application
itself.
To close and restart Vx76 application:
Step 1. At Vx76 menu, select Quit Vx76. Allow application to completely
shut down.
Step 2. At Mac desktop, double-click Vx76 icon to relaunch application.
A new show file (or last open show file) will automatically load and
Task Progress window will show progress of data downloads.
Power Down Console
Use the following procedure to power down the console and close the software application.
To power down console and Vx76 application:
Step 1. Save show file as required.
Step 2. At Vx76 menu, select Quit Vx76.
Step 3. At rear of console, set power switch to OFF position (Figure 10).
4 Out
Link
Panel
Status
Model 20-9818-0001
Act
100-240 VAC
50/60 Hz o
_
AC In Desk lamp
1A MAX
12 VDC
Act
Power Switch
Figure 10: Power Switch