Led indicators – PRG V276 Installation & Operation Manual User Manual
Page 22
12
V276 ON MAC INSTALLATION & OPERATION MANUAL
LED Indicators
LED indicators located on the rear panel provide feedback for device and system connections.
Figure 11: V276 Rear Panel Indicators
Indications are as follows:
Trigger:
+
Trigger In - Flashes green when a switch closure is detected on the trigger input.
MIDI:
+
In - Flashes green when when a MIDI message is received.
+
Out - Flashes green when a MIDI message is transmitted.
SMPTE:
+
SMPTE In - Lights green when a valid SMPTE input signal is present.
USB:
+
Link - Lights green when there is an active USB connection to the host computer.
+
Activity - Flashes green when a USB message is transmitted or received.
DMX In:
+
DMX - Lights green when DMX512 is being received.
+
RDM - Lights green when an RDM message is transmitted.
DMX Out (1-4):
+
DMX - Lights green when DMX512 is being transmitted.
+
RDM - Lights green when an RDM message is received.
Ethernet (Art-Net/sACN):
+
Link - Lights green when there is an active link to another Ethernet device.
+
Activity - Flashes green when an Ethernet message is received or transmitted.
Panel:
+
Status - Blinks green to indicate that the panel CPU is running.
+
Activity - Flashes green to indicate activity internal to the console (scanning switches, etc.).
In addition, all LEDs are bi-color and will light up or flash red to indicate that an error has been detected.
Out
Thru
In
In
Out
In
In
In
USB
DMX
RDM
Link
Act
1
2
3
4
Out
Link
Panel
Status
Model 20-9818-0001
Act
100-240 VAC
50/60 Hz
o
_
Desk lamp
Trigger
MIDI
SMPTE In
DMX
AC In
Desk lamp
1A MAX
12 VDC
12 VDC
Act
Out
Thru
In
In
Out
In
In
In
USB
DMX
RDM
Link
Act
1
2
3
4
Out
DMX
RDM
Panel
Status
Model 20-9818-0001
Act
100-240 VAC
1A MAX
o
_
Desk lamp
Trigger
MIDI
SMPTE In
DMX
AC In
Desk lamp
Trigger In
MIDI In & Out
SMPTE In
USB Link & Activity
Ethernet Link & Activity
DMX Out & RDM (4)
DMX In & RDM
Panel Status & Activity