Introduction, About this manual, Additional documentation – PRG S400 Tools User Manual 3.1 User Manual
Page 3
PRG SERIES 400
®
TOOLS UTILITY USER MANUAL
1
INTRODUCTION
About This Manual
This manual provides installation and operation instructions for the PRG Series 400® Tools Utility application. These
instructions apply to S400Tools software version 3.1.
Familiarizing yourself with this information will help you get the most out of your PRG product.
Additional Documentation
For information on PRG Series 400® equipment, refer to the following PRG manuals:
+
PRG Series 400® Power and Data Distribution System User Manual (02.9680.0001)
+
PRG Series 400® 400 Amp Disconnect User Manual (02.9680.0200)
+
PRG Series 400® Ethernet Switch User Manual (02.9801.0001)
+
Virtuoso® Node Plus User Manual (02.9801.0301)
+
Virtuoso® Node User Manual (02.9669.0001)
+
PRG Lighting Systems Networking Guide (02.3004.1000.0)
For more information regarding DMX512 systems, refer to the DMX512/1990 & AMX 192 Standards publication
available from United States Institute for Theatre Technology, Inc. (USITT).
USITT
6443 Ridings Road
Syracuse, NY 13206-1111 USA
1-800-93USITT
www.usitt.org
For more information regarding Art-Net protocol, refer to the specification for Art-Net II Ethernet Communication
Standard available from Artistic Licence Ltd.
Artistic Licence (UK) Ltd (Registered Office)
24 Forward Drive, Christchurch Avenue,
Harrow, Middlesex, HA3 8NT, United Kingdom
+44 (0)20 88 63 45 15 (phone)
+44 (0)20 84 26 05 51 (fax)
www.artisticlicence.com
For additional documentation, please visit our support tech center at: www.prg.com/support