PRG S400 Tools User Manual 3.1 - Manual (Page 6)

4 PRG SERIES 400 ® TOOLS UTILITY USER MANUAL
INSTALLATION
Installing the S400Tools Utility
The S400Tools Utility application can be run on any Macintosh® or Java-enabled Windows®
computer. Note that some Windows computers may not have Java installed, so it may be
necessary to install Java run time before using with a PC. Java run-times are available at:
http://java.com/getjava/ . (Macintosh computers should already be Java-enabled.)
To install S400 Tools Utility:
Step 1. Download or copy S400Tools application file to computer.
Step 2. Connect CAT5e Ethernet Cable from computer to Series 400 system.
Step 3. Configure network connection. The application looks for a port with an IP address in the pre-defined Series
400 subnet (10.66.x.x). Configure the IP address of the port to be used to an address in that range, such as
10.66.200.1, and the subnet mask to 255.255.0.0.
Step 4. At computer, locate S400Tools application icon. Double-click icon to launch program.
S400Tools