Ethernet switches, Series 400 10-port ethernet switch, Series 400 7-port ethernet switch – PRG S400 Systems Networking Guide User Manual
Page 10
PRG LIGHTING SYSTEMS NETWORKING GUIDE
9
Ethernet Switches
Series 400 10-Port Ethernet Switch
The PRG Series 400® 10-Port
Ethernet Switch provides a
powerful and convenient
interface between V676, Virtuoso
or DMX512 control consoles and
their control equipment. The 10-
Port Ethernet Switch offers two
types of connections: isolated
copper Ethernet ports and fiber
optic ports. The fiber optic ports
provide the ability to send fast and reliable information up to 2 kilometers
away without the need for repeaters by using PRG Fiber Optic Cable (the
Switch provides two fiber optic inputs and one fiber optic output). The
copper Ethernet connections offer the ability to combine standard copper
connections with fiber optic transmissions.
CAUTION:
Copper connections are limited to a max distance of
300 feet.
The 10-Port Ethernet Switch automatically determines the speed of each
network connection based on the equipment connected to the switch and
supports multiple connections with transmission and reception occurring
simultaneously.
10-Port Ethernet Switch features:
+
Seven isolated copper Ethernet ports for input of 10Base-T and
100Base-TX standard signal (Neutrik® EtherCon® connectors).
+
Three fiber optic Ethernet ports for transmission of 100Base-FX
standard signal. Two ports allow use of a PRG Fiber Optic Cable
input
connector and one port allows use of a PRG Fiber Optic Cable
output
connector.
+
Automatic detection and configuration of input signal speed.
+
Link, Transmission, and Reception status LEDs for all ports.
+
Neutrik® PowerCon® connector for input AC supply (90-240V).
+
DC power status LED.
+
Standard 1U 19" rack mount chassis.
Series 400 7-Port Ethernet Switch
The PRG Series 400® 7-Port
Ethernet Switch provides a
powerful and convenient
interface between V676,
Virtuoso or DMX512 control
consoles and their control
equipment. The
7-Port Ethernet Switch
provides seven isolated
copper Ethernet ports.
CAUTION:
Copper connections are limited to a max distance of
300 feet.
The 7-Port Ethernet Switch automatically determines the speed of each
network connection based on the equipment connected to the switch and
supports multiple connections with transmission and reception occurring
simultaneously.
7-Port Ethernet Switch features:
+
Seven isolated copper Ethernet ports for input of 10Base-T and
100Base-TX standard signal (Neutrik® EtherCon® connectors).
+
Automatic detection and configuration of input signal speed.
+
Link, Transmission, and Reception status LEDs for all ports.
+
Neutrik® PowerCon® connector for input AC supply (90-240V).
+
DC power status LED.
+
Standard 1U 19" rack mount chassis.