PRG Node Plus - Manual (Page 15)

PRG NODE PLUS USER MANUAL 13
Vx76/Virtuoso Console Setup
When using a PRG Node Plus with a PRG Vx76 or Virtuoso console, the Node can be set up using the console’s DMX
Setup window.
Step 1. At console, patch DMX fixtures and assign a DMX universe.
Step 2. At Setup menu, select DMX Setup. (DMX Setup window will open. )
Step 3. Select desired DMX universe.
Step 4. Enter Node thumbwheel address in "Thumb" field and select Node output (1-6)
in pop-up menu.
Step 5. Click Set button to assign universe to selected Node output.
Step 6. If patching sequential Nodes and outputs, pressing the [Return] button on the
keyboard will auto increment the patch. If not sequential, repeat Steps 3
through 5.
Troubleshooting
Symptom Indication Remedy
Node Plus online,
but no control. Appears in console configuration
window, but channels are not online. Incorrect patch: verify Node Plus address and that universes
are set to ‘Node’ not ‘Con’ in DMX Setup window.
Node Address
Set Button -
Press to enter current settings
and advance to the next line
Enable/Disable Patch Editing
DMX Output of Node
DMX Universe (A-ZZ)
Must be assigned to a
DMX Host (Node, etc.)
DMX512 channel
assignments for
selected universe
Orange highlights
show DMX channel
range for selected
fixtures