Specifications, Technical specifications – PRG Ethernet Switch User Manual
Page 12
10
PRG SERIES 400
®
ETHERNET SWITCH USER MANUAL
SPECIFICATIONS
Technical Specifications
POWER REQUIREMENT:
90 to 264 VAC, 47 to 63 Hz
Draws less than 60 watts continuously.
COOLING:
Convection.
OPERATING TEMP:
-20°C to 50°C (-4°F to 122°F)
COPPER PORTS:
Seven isolated copper ports that can accept Ethernet signals using either 10Base-T or
100Base-TX standards. Automatic detection and configuration of input signal speed.
FIBER OPTIC PORTS:
(
10-Port model only
) Three fiber optic ports that can accept 100Base-FX Ethernet signal.
The speed and direction of these ports are fixed. The ports use 62.5/125um multi-mode
fiber media at 1300nm wavelength and operate up to a 2KM distance.
INDICATORS:
Green LED power indicator to show that DC power has been applied.
Status LEDs for each port indicating Link, TX Data, and RX Data.
HOUSING:
Standard 1U 19" rack mount chassis.
WEIGHT:
4.5 lbs (2.04 kg)
COMPLIANCE:
United States: ANSI/UL 60950-1-UL Standard for Safety for Information Technology
Equipment Safety
Canada: CAN/CSA C22.2 No. 60950-1 Information Technology Equipment Safety
Europe: CE Mark
1.72"
(44 mm)
12"
(305 mm)
19"
(483 mm)
11"
(279 mm)
10-Port Model Shown
All models have the same dimensions