PRG Ethernet Switch - Manual (Page 5)

PRG SERIES 400 ® ETHERNET SWITCH USER MANUAL 3
OVERVIEW
10-Port Ethernet Switch
The PRG Series 400 10-Port Ethernet Switch provides a powerful and convenient interface between V676®,
Virtuoso®, or DMX512 control consoles and their control equipment. The 10-Port Ethernet Switch offers two types of
connections: isolated copper Ethernet ports and fiber optic ports. The fiber optic ports provide the ability to send fast
and reliable information up to 2 kilometers away without the need for repeaters using Virtuoso Fiber Optic Cable. The
copper Ethernet connections offer the ability to combine standard copper connections with fiber optic transmissions.
Note : Copper connections are limited to a maximum distance of 300 feet.
The 10-Port Ethernet Switch automatically determines the speed of each network connection based on the
equipment connected to the switch and supports multiple connections with transmission and reception occurring
simultaneously.
Features:
+ Seven isolated copper Ethernet ports for input of 10Base-T and 100Base-TX standard signal (Neutrik®
EtherCon® connectors).
+ Three fiber optic Ethernet ports for transmission of 100Base-FX standard signal. Two ports allow use of a Fiber
Optic Cable
input connector and one port allows use of a Fiber Optic Cable output connector.
+ Automatic detection and configuration of input signal speed.
+ Link, Transmission, and Reception status LEDs for all ports.
+ Neutrik® PowerCon® connector for input AC supply.
+ DC power status LED.
+ Standard 1U 19" rack mount chassis.
Included Items
The following illustration shows all items included with this model:
Figure 1: 10-Port Ethernet Switch Included Items
AC Line Cord 208V
PRG Series 400 10-Port
Ethernet Switch (20.9801.0200)
PowerCon® Cable Assembly
(25.9801.0214)