PS Engineering PCD7100-P Pilot’s Guide - Manual (Page 2)

2 Rev. 2 PCD7100-P Pilot Guide
GENERAL INFORMATION
SCOPE
This manual provides detailed operating instructions for the PS Engineer-
ing PCD7100-P (part numbers 11952, 11958, 11953, 11954), Compact
Disc (CD) player audio system. Please read it carefully before using the
equipment so that you can take full advantage of its capabilities.
PCD7100-P controls
Power Switch (Fail Safe Operation)
Unit power is turned on and off by pushing the intercom volume knob. As
with all non-essential in flight entertainment systems, the PCD7100-P
should be switched off for take-off and landing
CD Player Operation
Volume and Tone Control
The Music volume control knob (left side) adjusts the loudness of the CD
player output. Turning the volume control clockwise increases the CD vol-
ume. It has no effect on radio, intercom, or other systems’ volume.
Rotating the tone control clockwise will adjust the tone quality of the CD
music output by emphasizing the higher ranges (treble). Rotating the con-
trol counterclockwise will emphasize the lower frequencies (bass).
Operating the CD Player
The single-disk CD player is designed for simple operation. There are five
buttons with the following functions.
CD PLAYER
VOLUME
MUSIC
TONE
PLAY SKIP FWD SKIP BACK STOP
PUSH
ON-OFF
PUSH
AWS ACK
CONTROL