PULSE ShowerSpas 1034 Waimea - Manual (Page 5)

5
Assembly
After Unpacking Your ShowerSpa, Some Assembly Is Required Prior To Installation
Handheld Holder Assembly
Figure 2
1. Place the threaded end of the hand shower holder (4) into the hand shower outlet (6). Make certain the opening in the hand shower
holder (4) is facing forward.
2. Tighten hand shower holder (4) to ShowerSpa (1) with nut (5).
After The ShowerSpa Is Mounted To The Wall
Connect The Hand Shower
1. Insert a rubber washer (11) into the hex end of the shower hose (3), and attach to the hand shower outlet (6).
2. Insert a rubber washer (11) into the tapered end of the shower hose (3) and attach to the hand shower (2). Place the tapered end of the
hose into the hand shower holder (4).