Ram Trucks 2013 3500 - User Guide - Manual (Page 156)

• Using the screwdriver or similar tool, push the Manual Park Release lever
locking tab (just below the middle of the lever) to the right.
• While holding the locking tab in
the disengaged position, pull the
tether strap to rotate the lever rear-
ward, until it locks in place pointing
towards the driver's seat. Release
the locking tab and verify that the
Manual Park Release lever is
locked in the released position.
• The vehicle is now out of PARK and
can be towed. Release the parking
brake only when the vehicle is se-
curely connected to a tow vehicle.
To Reset The Manual Park Release:
• Push the locking tab to the right, to
unlock the lever.
• Rotate the Manual Park Release lever
forward to its original position, until
the locking tab snaps into place to
secure the lever.
• Pull gently on the tether strap to con-
firm that the lever is locked in its
stowed position.
• Re-install the access cover.
WARNING!
Always secure your vehicle by fully applying the parking brake, before activating
the Manual Park Release. Activating the Manual Park Release will allow your
vehicle to roll away if it is not secured by the parking brake or by proper connection
to a tow vehicle. Activating the Manual Park Release on an unsecured vehicle
could lead to serious injury or death for those in or around the vehicle.
WHAT TO DO IN EMERGENCIES
154