Cargo camera — if equipped, Turning cargo camera on or off — with, Uconnect® 8.4a/8.4an – Ram Trucks 2015 3500 - Owner Manual User Manual

Page 257

Advertising
background image

There are stampings in the sheet metal on the inner side

bulkheads of the box in front of and behind both wheel

housings. Place wooden boards across the box from side

to side to create separate load compartments in the

pickup box.
There are four tie-down cleats bolted to the lower sides of

the pickup box that can sustain loads up to 1000 lbs

(450 kg) total.

Cargo Camera — If Equipped

Your vehicle may be equipped with the Cargo Camera

that allows you to see an image of the inside of the

pickup box. The image will be displayed in the

Uconnect® screen.
A display timer is initiated when the cargo camera image

is displayed. The image will continue to be displayed

until the display timer exceeds 10 seconds and the vehicle

speed is above 8 mph (13 km/h) or the image is deacti-

vated by touching the Uconnect® display.

NOTE:

If the vehicle speed remains below 8 mph

(13 km/h), the cargo camera image will be displayed

continuously until deactivated by touching the

Uconnect® display.
The Cargo Camera is located in the bottom center area of

the center high-mounted stoplamp (CHMSL).
NOTE:

If snow, ice, mud, or any foreign substance builds

up on the camera lens, clean the lens, rinse with water,

and dry with a soft cloth. Do not cover the lens.

Turning Cargo Camera On Or Off — With
Uconnect® 8.4A/8.4AN

1. Press the “Controls” button located on the bottom of

the Uconnect® display.

2. Press the “Cargo Camera” button

to turn the

Cargo Camera system ON.

3

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 255

Advertising
This manual is related to the following products: