System reset procedure, Air bag warning light – Ram Trucks 2015 3500 - Owner Manual User Manual

Page 80

Advertising
background image

System Reset Procedure
In order to reset the Enhanced Accident Response System

functions after an event, the ignition switch must be

changed from ignition START or ON/RUN to ignition

OFF.
Air Bag Warning Light

The air bags must be ready to inflate for your

protection in a collision. The Occupant Re-

straint Controller (ORC) monitors the internal

circuits and interconnecting wiring associated

with air bag system electrical components.
The ORC monitors the readiness of the electronic parts of

the air bag system whenever the ignition is in the START

or ON/RUN position. If the ignition is in the OFF

position or in the ACC position, the air bag system is not

on and the air bags will not inflate.

The ORC contains a backup power supply system that

may deploy the air bags even if the battery loses power or

it becomes disconnected prior to deployment.
The ORC turns on the Air Bag Warning Light in the

instrument panel for approximately four to eight seconds

for a self-check when the ignition is first placed in the

ON/RUN position. After the self-check, the Air Bag

Warning Light will turn off. If the ORC detects a mal-

function in any part of the system, it turns on the Air Bag

Warning Light, either momentarily or continuously. A

single chime will sound to alert you if the light comes on

again after initial startup.
The ORC also includes diagnostics that will illuminate

the instrument panel Air Bag Warning Light if a malfunc-

tion is detected that could affect the air bag system. The

diagnostics also record the nature of the malfunction.

While the air bag system is designed to be maintenance

78 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Advertising
This manual is related to the following products: