Features, Before you start, Read first – RED OLPF FRAME User Manual
Page 3: Olpf frame components, Tools required, Features 3 before you start, Olpf frame installation instructions
COPYRIGHT © 2012 RED.COM, INC
/
955-0011, Rev-A1 3
OLPF FRAME INSTALLATION INSTRUCTIONS
feaTures
• Each RED DSMC
®
Camera has an optical low-pass filter (OLPF) The OLPF frame secures the OPLF to the camera.
• RED has designed a new low-profile OPLF frame to accommodate the RED LEICA-M LENS MOUNT.
• This new OLPF frame is compatible with all RED DSMC PL, Canon, Nikon, and Leica lens mounts.
before You sTarT
reaD fIrsT
Note: The new OPLF frame must be installed on your camera before using the RED LEICA-M LENS MOUNT.
RED
®
is providing the following installation instructions to our customers for installing the OLPF Frame. The
procedure is the same on RED EPIC-M, EPIC-X and Scarlet-X camera brains.
If you properly install the OLPF frame by following these installation instructions, your warranty will not be void.
CAUTION: Use extreme care to ensure that no tools come into contact with OLPF.
If you want RED to perform the installation of the OLPF frame for you, RED will do so free of
charge. Please contact your Bomb Squad representative for complete details.
olPf frame ComPonenTs
The OLPF Port Frame comes with the following:
• OLPF Port Frame
• Four replacement screws
• T-4 Torx
®
Wrench
Tools requIreD
• T-20 Torx Driver
• T-4 Torx Wrench (Included)
• Tweezers