Canon CR-50 - Manual (Page 19)

19
The following software application is provided on the setup disc that is
packaged with the scanner. Make sure to open and read the
Readme.txt file on the setup disc before installing the software.
Scanning Utility
Canon Scanning Utility is an application that provides scanning, file
saving, image viewing, printing, and various other functions. A
dedicated scanner driver is installed after you install the utility
software.
IMPORTANT
• The Scanning Utility includes a device driver so that Windows can
recognize the CR-50/80. Be sure to install the Scanning Utility before
connecting the CR-50/80 to the computer.
• Some functions mentioned in this manual may not be operated in some
applications.
Installing the Scanning Utility
Follow the instructions below to install the Scanning Utility and the
dedicated driver.
NOTE
The dedicated scanner driver is installed after the Scanning Utility has been
installed.
A
Turn ON your computer, and log on to Windows.
IMPORTANT
Be sure to log on as the Administrator.
B
Insert the setup disc into the disk drive.
This manual assumes that “D” is assigned to your disk drive.
C
Click [Start], and then click [All Programs].
The procedure in Windows XP is different from the ones
described in this manual. Refer to the Windows XP “Help and
Support Center” to select [Run].
Installing the Software