Canon CR-50 - Manual (Page 36)

36
Scan Procedure
A
Pull out the document feed tray.
B
Carefully align the edges of the document.
C
Load the documents with their front sides facing right and with
their edges flush against the document load mark.
D
Adjust the Eject Stopper in accordance with the document.
E
Instruct scanning to start from the software application.
NOTE
• When Using the Accompanying Scanning Utility for CR-50/80:
There are three scanning methods as follows. Follow the each instruction.
Scan 1 page
Click [Scan Page] from the [File] menu.
Scan Batch to File
A Click [Scan Batch to File] from the [File] menu.
B Input the File name, and then click [Save].
C Select Simplex or Duplex, and then click [Start Scanning].
Scan Batch to Printer
A Click [Scan Batch to Printer] from the [File] menu.
B Select Simplex or Duplex, and then click [Start Scanning].
Document
Load Mark