Cypress 1120 - Manual (Page 33)

Adjusting the contrast level of the display Changing Your IP Phone Settings
Copyright © 2007 Cypress Communications, Inc. All Rights Reserved. 33
Restoring default settings for a feature key
Steps to Take
1. From the main menu, select and open the Feature menu.
2. Select the feature that you want to relabel by navigating to the item in the list, and then
pressing the Enter key or the Ok key.
3. Select the Reset option, and then press the Ok key. A message appears asking you to
confirm that you want to apply the default settings to the feature key.
4. Press Yes. The key is reset.
5. Press the Ok key or the Enter key.
Adjusting the contrast level of the display
Steps to Take
1. From the main menu, select and open Display The Contrast screen appears.
2. Perform one of these actions:
• To decrease the contrast, press the left navigation key.
• To increase the contrast, press the right navigation key.
The percentage scale on the screen shows the degree of change. The level decreases or
increases each time you press the key.
3. Stop pressing the key when you find the contrast you like.
4. Press the Ok key. The current contrast level is saved and you return to the previous
screen.
Selecting a language
Steps to Take
1. From the main menu, select and open Language. A list of available languages appears.
2. Scroll through the list and select your preferred language.
3. Press the Ok key. The terminal now displays text in the selected language.
4. Press Cancel. You return to the main menu.