Cabletron Systems ESX-1380 - Manual (Page 17)

Local Management Screen Elements
ESX-1320/ESX-1380 Local Management Guide 1-7
The following list explains each of the Local Management fields:
Event Message Field
This field briefly displays messages that indicate if a Local Management
procedure was executed correctly or incorrectly, that changes were saved
or not saved to Non-Volatile Random Access Memory (NVRAM), or that
a user did not have access privileges to an application.
Table 1-1 describes the most common event messages. Event messages
related to specific Local Management applications are described with
those applications throughout this manual.
Display Fields
Display fields cannot be edited. These fields may display information
which never changes, or information which may change as a result of
Local Management operations, user selections, or network monitoring
information.
Input Fields
Input fields require the entry of keyboard characters. IP addresses, System
Date, and System Time are examples of Input fields.
Selection Fields
Selection fields provide a series of possible values. Only applicable values
appear in Selection fields.
Command Fields
Command fields are located at the bottom of Local Management screens.
Command fields are used to exit Local Management screens and to save
Local Management entries.
Table 1-1 Event Messages
Message What it Means
SAVED OK
One or more fields were modified,
and saved to NVRAM.
NOT SAVED?--PRESS SAVE TO
KEEP CHANGES One or more fields were modified,
but not saved to NVRAM.
NOTHING TO SAVE
The SAVE command was executed,
but nothing was saved to NVRAM.