Classe Audio Omega Super Audio - Manual (Page 10)

10
Controlling the display
The Omega SACD Player display function can
be changed using keys on the remote control
as follows:
ON/OFF
Pressing the ON/OFF key will cause the display
toggle between ON mode and OFF mode.
In OFF mode, the display will remain off unless
a key on the top panel or the remote control
is pressed. In ON mode, the display remains
illuminated during operation.
TIME
The TIME key changes how the front panel
display indicates time. The display can show
elapsed time for the current track, time remaining
for the current track, or time remaining for the
entire disc. Pressing the TIME key scrolls through
the three options as shown below:
Programming
Several programming features allow you to listen
to tracks in a particular order or repeat tracks. All
keys for programming are on the remote control.
SHUFFLE
Press the SHUFFLE key to hear tracks in a
random order. Pressing CONTINUE will resume
normal playing.
REPEAT
Use the REPEAT key to hear a single track or the
entire disc repeated. Pressing REPEAT once will
cause the Omega SACD to repeat the entire disc.
This is indicated by the word “Repeat” illuminated
on the front panel display.
Pressing REPEAT a second time will cause the
Omega SACD to repeat the current track. This is
indicated by the word “Repeat1” illuminating on
the front panel display.
Pressing REPEAT a third time will revert to
normal play.
A – B Repeat
This function allows you to repeat one section of a
track or disc. Pressing the A – B key on the remote
sets the beginning of the section to be repeated.
Pressing the A – B key a second time will set the
end point for the repeating section. When the A –
B key is pressed the second time, the Omega SACD
Player will begin to repeat the selected portion of
the disc.
To resume normal play, press REPEAT or STOP.
Creating your own program
To program the Omega SACD to play tracks in
a specific order, follow these steps:
1. If the disc is playing, press STOP.
2. Press the PROGRAM key.
3. Use the 10-digit keypad to enter the track
number of the first track in the program.
For more information, see Using the Direct
Access Keypad.
If you entered the wrong track, press CLEAR.
4. Enter the next track number in the same
manner. Each time you enter a track number,
the total program time appears in the display.
5. When you are finished, press PLAY to hear
the program.
6. The program will be erased if you turn the
AC power off or press the OPEN/CLOSE key.
CHECK
To check the order of the program, use the
CHECK key. Each time you press CHECK, the
number of the next track in the program appears
on the display.
CLEAR
When the player is stopped, you can use the
CLEAR key to delete tracks from the program. Press
the CHECK key repeatedly until the track number
that you want to delete appears on the display,
then press CLEAR to delete that track.
Press TIME
Press TIME
Track number and elapsed time
Track number and remaining time
Time remaining on disc
of current track
of current track
Display:
Display:
Press TIME