Classe Audio Omega Super Audio - Manual (Page 7)

Front panel display
Below is an illustration of the Omega SACD front
panel display and a description of each indicator.
The remote control
The remote control provides access to all functions
available on the front panel. In addition, several
functions can only be accessed from the remote
control. For instructions on how to use keys that
are duplicated on the main-unit top panel, see the
instructions in the previous section. For other
functions, see complete descriptions on the page
number indicated.
Loading or unloading a disc
To load a disc, follow these steps:
1. Press the OPEN/CLOSE key on the top panel
to open the loading door.
2. Once the loading door is opened, remove the
disc stabilizer weight and place the disc (with
the label facing up) on the spindle.
3. Place the stabilizer weight on top of the disc
(felt side facing down).
4. Press the OPEN/CLOSE, PLAY, or SKIP keys
to close the loading door.
To unload a disc, press OPEN/CLOSE, then
remove stabilizer and disc. The loading door will
close automatically if left open for more than
one minute.
7
SRC
DISPLAY
CONT. SHUFFLE A-B
CLEAR PROG.
>10 1
3 4 5 6
7
<INDEX
PLAY
PAUSE STOP
MUTE VOL
RC MODEL 19
>> <<
INDEX>
8 9 0
2
CHECK REPEAT
ON/OFF TIME
INPUT SACD/CD
HDCD
SUPER AUDIO
CD
INTERNAL SPDIF TOSLINK SRC
Text display
HDCD filter
indicator
Track number and time
remaining Input indicators:
Internal SACD/CD
SPDIF input
TOSLINK input
Keys used to:
Control playback
options. See page 9
Control the display.
See page 10
Keys used for
programming
Direct access keypad
See page 9
Keys to play a disc
Keys to control Classé
preamplifier or
integrated amplifier.
See page 11
Standby indicator
Sample-rate convertor
indicator