Cortelco 8012 - Manual (Page 36)

36
Handset Name
The 8012 handset can be given a name. This is useful if more than one handset is
registered to a base. To set the handset name:
1.
Press the Menu soft key.
2. Press or repeatedly to choose HS Settings.
3. Press the Select soft key.
4. Use or to choose HS Name.
5. Press the Select soft key.
6. Enter the name (up to 12 characters) using the keypad. Use the Erase soft key
to correct any mistakes.
7. Press the Save soft key.
8. The handset name will display above the handset number in standby mode.