Cortelco 8012 - Manual (Page 59)

59
Registration
The hanset ships from the factory registered as Number 1. Up to 5 handsets can be
registered with one base. This allows a line to be shared among multiple handsets.
Before changing the handset registration, press the key on the base for approxi-
mately 5 seconds. Then perform the following steps.
1.
Press the Menu soft key.
2. Press or repeatedly to select Registration.
3. Press the Select soft key.
4. Press or to scroll through the Base Names.
5. Press the Select soft key to choose a base.
6. If the base is found, a prompt for the PIN Code will appear. The default PIN
Code is 0000. Enter PIN Code and press the Select soft key. If the PIN Code is
correct, a Registration tone will sound and the handset will be assigned a new
number. If the PIN Code is incorrect, a warning tone will sound and the handset
will return to its previous registration. If the base is not found, the handset will
enter the Out of Range mode.