Casablanca Fan Company Twain TYPE HANGER TYPE DJ01 1151 C25G624FPOMONA - Manual (Page 17)

Twain
™
17
STEP 1
STEP 2
Blade iron
Blade holder ring
Blade holder screws (2)
Installed
blades
Fan blade assembly
Installing the Blades
Hardware (not to scale)
Blades (5)
Blade Iron Plate
Screws (21)
Blade Iron Plates (5) Blade Irons (5)
Blade Iron Screws (11)
Assembling
1
Place the blade iron plate on top of the blade
and the blade iron underneath the blade. Use a
manual screwdriver to secure the blade iron and plate
with the blade iron plate screws. Use four screws per
blade. Repeat this process for each fan blade.
CAUTION:
Ñ
Do not use an electric
screwdriver to assemble fan blades!
Attaching
2
Install the assembled blades to the blade
holder ring using the blade iron screws. Use two
screws for each blade. Insert the end of the blade
holder into the slot on the blade holder ring.
Tighten the screws with a manual screwdriver.
CAUTION:
Ñ
Do not operate the fan at
this point. Installation must be completed
before turning on the fan.
NO DRILL