Sandia Aerospace SAC 7-35 - Manual (Page 31)

305586-00 30
4.4 Continued Airworthiness
The encoder portion of the SAC 7-35 requires calibration every 24 months per FAR 91.411. All
other maintenance is on condition only.
4.3.10 OAT Probe Trim
The OAT probe trim should always be set to 0 for SAC 7-35 installations with the Sandia
Aerospace OAT Probe (305561-01).
Parameter Description Allowed Settings
o. OAT Probe Outside Air Temperature Trim +/-127 0.05 O C
Enter high and then low trim offsets