Compatible Systems RIOP HSSI-10/100 - Manual (Page 6)

Introduction to the HSSI-10/100 RIOP 2
Introduction to the HSSI-10/100 RIOP
The HSSI-10/100 Routing Input/Output Processor (RIOP), as part of the VSR multigigabit
switching router, allows you to connect a local Ethernet and remote corporate network. The
HSSI interface has a data capacity of 44.736 Mbps, while the Ethernet interface can operate at
either 10 Mbps or 100 Mbps.
This section of the manual contains information specific to the HSSI-10/100 RIOP. It is
divided into the following sections:
Chapter 1: Network Installation
Here you will find step-by-step instructions on how to physically install the HSSI-10/100 and
connect it to your network.
Chapter 2: Quickstart Configuration
The Quickstart section provides a basic list of parameters that must be entered into the
HSSI-10/100 for proper operation.
Chapter 3: Shipping Defaults
This section of the manual lists factory defaults for each interface.
Chapter 4: LED Patterns
This section of the manual describes the LED indicators for the HSSI-10/100.