Sony XR-C7500RX - Manual (Page 18)

18
Setting the clock
automatically
The CT (Clock Time) data from the RDS
transmission sets the clock automatically.
1
During radio reception, press (MENU),
then press either side of (PRST/DISC)
repeatedly until “CT” appears.
2
Press (+) side of (SEEK/AMS) repeatedly
until “CT on” appears.
The clock is set.
3
Press (ENTER) to return to the normal
display.
To cancel the CT function
Select “CT off” in step 2.
Notes
• The CT function may not work even though an
RDS station is being received.
• There might be a difference between the time
set by the CT function and the actual time.
1
Press (DSPL/PTY) during FM reception
until “PTY” appears.
The current programme type name appears
if the station is transmitting the PTY data.
“- - - - -” appears if the received station is
not an RDS station, or if the RDS data has
not been received.
2
Press either side of (PRST/DISC)
repeatedly until the desired programme
type appears.
The programme types appear in the order
shown in the above table. Note that you
cannot select “None” (Not specified) for
searching.
3
Press (ENTER).
The unit starts searching for a station
broadcasting the selected programme type.