Sony XR-C7500RX - Manual (Page 31)

31
1
Press (MENU).
2
Press either side of (PRST/DISC)
repeatedly until the desired item
appears.
Each time you press (–) side of
(PRST/DISC), the item changes as follows:
Example:
Clock t CT t Beep t RM t Multi language
t D.Info* 1 t SA t Amber/Green* 2 t
Dimmer t Contrast t M.Dspl t A.Scrl* 1 t
EQ Tune
* 1 When the radio is off, or when no tape, CD,
or MD is playing, this item will not appear.
* 2 XR-C7500R only
Note
The displayed item will differ depending on the
source.
Tip
You can easily switch among categories (“SET,”
“DIS” and “SND”) by pressing and holding either
side of (PRST/DISC) for two seconds.
3
Press (+) side of (SEEK/AMS) to select the
desired setting (Example: “on” or “off”).
4
Press (ENTER).
After the mode setting is complete, the
display returns to normal playback mode.
* 1 If you have not labelled the disc or if there is no
disc name prerecorded on the MD, “DISC” and
“NO D.Name” appears in the display.
* 2 If you play a CD TEXT disc, the artist name
appears in the display after the disc name.
(Only for CD TEXT discs with the artist name.)
* 3 If the track name of a CD TEXT disc or MD is not
prerecorded, “TRACK” and “NO T.Name”
appears in the display.
* 4 While the AF/TA function is activated.
With Optional Equipment
CD/MD Unit
This unit can control external CD/MD units.
If you connect an optional CD unit with the
CD TEXT function, the CD TEXT information
will appear in the display when you play a CD
TEXT disc.
Playing a CD or MD
1
Press (SOURCE) repeatedly to select CD
or MD.
2
Press (MODE) until the desired unit
appears.
CD/MD playback starts.
When a CD/MD unit is connected, all the
tracks play from the beginning.
Changing the display item
Each time you press (DSPL/PTY) during CD,
CD TEXT, or MD playback, the item changes
as follows:
V
Elapsed playback time
V
Disc name* 1 /Artist name* 2
V
Track name* 3
V
FM1 frequency* 4
continue to next page t