SAVV AVH-DDM101P - Manual (Page 6)

6
Playing MP3 Files
Display Information
During playback, ID3 tag information display
scrolling on the screen: FOLDER, FILE,
ALBUM, TITLE, ARTIST and Track Number/
Elapsed Time.
— — — — — — — — — — — — — — — — — — — —
Folder Up/Down
Press the [ 5 ] button to go to the previous
folder. Press the [ 6 ] button to go to the next
folder.
— — — — — — — — — — — — — — — — — — — —
Direct Song/File Access
1. Press the [ APS ] button once and press the
knob to enable direct track searching.
2. Rotate the knob to select a digit at the units
position.
3. Press the knob to confirm entry and the tens
digit will flash.
4. Rotate the knob to select the tens digit.
5. Repeat above steps to enter the hundreds
and thousands digit, if necessary.
NOTE: The unit will only allow the selection
of digits that correspond with the number of
files on the media you are searching.
6. Once the track number appears on the
screen, press the knob to play the selected
song/file.
Searching Folders/Files
1. Press the [ APS ] button twice and press the
knob to access the “FILE SCH” option.
2. Rotate the knob to select the desired
directory/song.
3. Press the knob to view the files inside the
selected directory.
4. Rotate the knob to select the song/file. Press
the knob to play the selected song/file.
RDS (Radio Data System)
TA: Traffic information can be received from
the current station or stations in other network.
AF: The frequency list of preset RDS stations
is updated by EON data. EON enables the
radio to make fuller use of RDS information.
It constantly updates the AF list of preset
stations, including the one that currently tuned
into. If you preset a station around the area at
your home, you will later be able to receive the
same station at an alternative frequency, or
any other station serving the same program,
EON also keeps track of locally available TP
stations for quick reception.
PTY Reception ( Program Type )
RDS FM stations provide a program type
identification signal.
Example: news, rock, info, sport, etc.
PTY Type Preset
Press
[ PTY/TA ] button once to enter the
PTY mode. Then rotate the knob to select
the desired program type. The selected PTY
type is shown and searching starts if no other
function is selected for 2 seconds. If there is
no corresponding program type, NO PTY is
shown and the unit will return to normal mode.